150 BBL PREMIX/PILL TANK
Specifications
- Active Capacity 150 BBL—Single 150 BBL Compartment
- Dimensions: Length 26’ 6” x Width 7’ 9” x 10’ Height Weight: 22,000 lbs
- Construction: Three Beam Skid construction w/ sloped floor tank
- Top Rail Height: 36” swing down for transport
- Internal ladder rungs with removable manways for tank access
- Mix/Transfer pump: 6 x 5 x 14 w/ 75 hp, 1150 rpm electric motor
- Power Requirements: 460v-3ph-60hz
- Two Tank Agitators: 15 hp 460v-3ph-60hz with 40”-4 Blade Impeller @ 58 rpm
- Shear Hopper: Aqua Shear High Efficiency w/ 4” liquid eductor
- Bulk Hopper: Flow Process Technologies 6” High capacity
- Mud Guns: Two 2” guidable mud guns
150 BBL (TWIN 75) PREMIX/PILL TANK
Use as a “pill tank” for LCM. The two 75 BBL compartments allow the operator to build two separate “pills” or “sweeps” & transfer immediately to the active system (can also pressure equalize the tank to a single 150BBL unit). The two (2) 6x5x14 pumps allow for immediate backup should any issues arise during critical operations.
OR
Use as a “pre-mix station” when building mud on location. Transfer mud straight to active system or over to storage tanks. This flow loop is beneficial after building the fluid to maintain mud quality & prevent “falling out” of the fluid system.
When the system is not being utilized as a “pill tank” the system reverts back to a “pre-mix station”
SPECIFICATIONS:
Active Capacity: Two 75 BBL Compartments
Dimensions: Length 36’ x Width 8’ x 10’ Height Weight: Approx.32,000 lbs
Construction: Three Beam Skid construction w/ sloped floor tank
Top Rail Height: 36” removable rail for transport
Mix/Transfer pump: Two 6 x5x14, belt driven pumps w/75hp, 1150rpm electric motor
Power Requirements: 460v – 3ph – 60hz – 100 amp minimum
Two Tank Agitators: 15hp 460v – 60hz, 60amp min with 40”4 Blade Impeller @ 58 rpm
Shear Hopper: Aqua Shear High Efficiency w/ 4” liquid eductor
Mud Guns: Two 2” guidable mud guns (one in each compartment)
